How To Use Mapesil T Plus
With first-class water and abrasion resistance, Mapei'southward Ultracolour Plus with its wide range of colours, offers the perfect grouted finish to the tile installation.
Materials required:
- Mapei Ultracolour Plus
- 500ml Water
- Mapesil Air-conditioning Silicone
Tools & accessories required:
- Flooring protection sheet
- Mixing bucket
- Protective gloves
- Mechanical stirrer
- Soft rubber float
- 2x Buckets of water
- 2x Sponges
- Microfibre material
- Silicone applicator gun
Shop ALL TILING TOOLS & ACCESSORIES HERE
Preparing and applying Ultracolour plus grout
Preparing the area
Earlier considering grouting, ideally all spacers should exist removed. Ensure that all joints are free from adhesive or any loose material. When applying grout to the walls, ensure that all areas are protected from spillage. The central to applying grout to an excellent end is not merely in the application, merely in the mixing itself.
Mixing the grout
When mixing Mapei Ultracolour Plus the bag must be shaken to ensure an even distribution of ingredients. A clean mixing vessel should be used and the minimum recommended water placed in the bucket. Measuring water on site can be hard so an empty 500ml drinks bottle can be used to measure out the water.
When 0.9l of water is in the bucket, the bag tin can be opened and all the contents poured into the bucket. The mixing of the production should be carried out by mechanical means. During the mixing the product will announced dry simply this is expected.
Subsequently mixing with the paddle for approximately 2 minutes, the production should be allowed to correspond 2-three minutes, this will allow the product to slake. After 2-iii minutes the product can be remixed. If at this betoken the product nonetheless appears also dry, the remaining 0.1l of water may be added.
Once mixed, the grout will remain workable for approximately xx-25 minutes. If the grout begins to harden in the bucket, it tin can be remixed with the mechanical stirrer, but do non add any more water.
Applying Grout to the Wall
The grout can then be applied to the wall surface using a soft, rubber float. The method of awarding is downwardly to personal preference, however pointing the joints in a manner that allows the air to be removed from the joint is advisable.
The grout must be compacted into the joint, ensuring a full joint is achieved. A simple spread over the top surface could lead to the materials sitting at the surface of the articulation, either leaving a void backside or allowing pinholing to occur during the washing off process.
Once the grout is in the joint, the grout float tin be used at a 45 caste angle to remove excess from the tile surface. Care should exist taken at this indicate so as not to remove too much of the grout from the joint itself.
Once the grout has been practical and the cloth on the surface begins to dry out, the washing off process can brainstorm.
Washing off backlog grout
It is advisable to accept two clean buckets of water at this point. The first saucepan will be used to rinse the sponge of the majority material. The second will be used as a secondary clean.
Soak the sponge in clean h2o and wring out until simply damp. In the first example, we are but looking to remove the grout from the surface of the tiles. A circular motion can exist adopted for this.
Regular rinsing of the sponge will foreclose the backlog grout simply being moved around the surface of the tiling. When the backlog grout has been removed, the secondary wash tin take place. A diagonal movement turning the sponge regularly will remove the remaining film.
Preparing internal corners for sealant and creating a perfect joint cease
The internal corner and movement joints must be free from whatever grout material and tin can be cleaned out at this stage.
If any pinholes or depression spots have occurred, simply top these areas upwards with the grout fabric and sponge off. Later on this footstep has been completed, nosotros can concentrate on the joint finish. With the sponge, strike the joints to ensure an fifty-fifty finish to the surface.
Please ensure that the sponge is merely damp throughout all of the aforementioned process, as excess h2o practical at whatsoever stage can have a detrimental consequence on the grout finish.
Removing excess motion-picture show
Although several washes have been carried out, a slight motion picture may exist left on the surface of the tile. This tin be removed afterwards a couple of hours with a microfibre cloth. Simply buff the surface of the tiles removing the residual.
Applying Mapesil Ac
Once the Mapei Ultracolour Plus has dried, Mapesil AC should be used in all areas bailiwick to movement, such as internal corners and around baths and showers.
To install the Mapesil Air conditioning, cut the top of the tube. The nozzle can then be screwed onto the silicone tube. The small end of the nozzle must be cut at a 45 degree angle to a slightly wider opening than the joint width.
Once cutting, the tube tin be loaded into a suitable silicone applicator gun. The nozzle tin can exist offered to the joint, to check that the nozzle cut width is slightly larger than the joint width. Squeezing the trigger volition push the new silicone into the nozzle and this tin be wiped at the end.
The silicone can so be applied to the corner. A slow, steady pace should be adopted, squeezing the trigger consistently. In one case the joint has been covered, we are prepare to finish the joints. For ease, water can be used - wet the finger and smooth gently over the articulation, wiping any backlog silicone abroad.
Share your photos with u.s. on Twitter or Instagram to exist featured, using #TileGiant
Head over to our YouTube channel to browse more how-to videos, or contact our team for further expert communication.
Source: https://www.tilegiant.co.uk/news/how-to-mix-and-apply-ultracolour-plus-and-mapesil/
0 Response to "How To Use Mapesil T Plus"
Post a Comment